New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows San Diego pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Windows & Doors in San Diego, CA | Hale Windows San Diego
We service CGI windows and doors across San Diego independently, with factory-spec techniques and a Window Repair in San Diego approach that saves homeowners real money. The one thing that makes our CGI work here different: we know exactly how coastal salt air and intense sun break down these specific frames and hardware, and we stock the parts to fix them fast. Call (619) 793-3248 for a free estimate on any CGI window or door in the San Diego area.
For over a decade, our team has torn down and rebuilt CGI Estate, Sentinel, and Classic Line units in neighborhoods from Clairemont to Mira Mesa. We handle everything from seized slider rollers to full frame replacement for impact-rated windows. If you’re looking for broader CGI sales & service options, we can walk you through the full product range. Spencer Odell, owner of Hale Windows San Diego, has spent the better part of two decades measuring, installing, and standing behind windows and doors across Southern California, and he brings that same standard to every CGI job we take.
Why San Diego Residents Choose Us for CGI Service
Most window companies in San Diego treat CGI units like any other window. We don’t. CGI builds their frames for hurricane-impact resistance, but in our climate, the real enemy is galvanic corrosion where stainless hardware meets aluminum at frame corners. Within five miles of the coast, that marine layer accelerates the reaction dramatically. We see pitted frame corners and seized hardware on CGI windows that are only six or seven years old in places like Ocean Beach and Point Loma.
Our techs rebuild CGI windows and doors the way the factory intended, but with a local eye. We use OEM CGI hardware for structural and impact-rated components. When OEM parts are discontinued or priced unreasonably, we substitute high-grade stainless or marine-grade aftermarket rollers, balances, and weatherstripping. Spencer learned early at Los Angeles Trade-Technical College that the right fastener in the wrong metal creates a battery. We apply that daily on San Diego’s salty coastline.
Common CGI Windows & Doors Problems We Solve in San Diego
- Galvanic corrosion at aluminum frame corners. CGI Estate Collection frames are aluminum, and their stainless hardware contact points become a corrosion cell when marine layer salts sit on the metal. We see this constantly within a few miles of the beach. The fix is disassembly, cleaning, and re-assembly with proper isolation materials.
- UV-brittle vinyl glazing beads on Sentinel Series windows. West-facing CGI Sentinel windows in Clairemont and University City take direct afternoon sun. The vinyl glazing beads get brittle and crack during re-glazing, usually around year five or six. We replace them with UV-stable aftermarket beads that hold up far longer in San Diego’s sun.
- Seized roller assemblies on CGI 3-panel sliders. Sand and salt grit grind into the roller tracks on these sliders, and the center panel locks up completely. This is the number one CGI slider failure we see in Mira Mesa and Kearny Mesa. We swap in marine-grade stainless rollers and clean out the tracks.
- Clogged weep holes with salt and dust buildup. The coastal dust in San Diego is a fine, salty powder that blocks weep holes on CGI frames. Water sits inside the frame channels and stains interior sills. We clear the weep system and install weep covers that shed debris.
- Bowed sashes from frame corrosion pressure. When the aluminum frame corrodes deeply enough, the sash bows. That’s a structural issue, not a hardware issue. At that point, full frame replacement to a vinyl impact unit is usually the smarter long-term fix.
CGI Service in San Diego: What Local Conditions Mean for Your Equipment
Here’s something we see in San Diego that you won’t find ten miles inland. Original 1960s aluminum sliders in Clairemont and Mira Mesa, many of them sitting in mid-century ranch-style homes, are pitted and seized from decades of salt air. The aluminum pitting is deep, the rollers are frozen solid, and the track channels are crusted with compacted salt and sand. This isn’t a wear-and-tear repair issue; it’s a galvanic corrosion problem that started the day the window went in. When those original units are CGI Classic Line sliders, homeowners face a decision: rebuild a corroded aluminum frame that will fail again, or move to a vinyl impact unit like the Sentinel Series that resists that exact corrosion mechanism. In Mira Mesa, we replaced two original CGI Classic Line 3-panel sliders on a 1969 ranch where the center panels had seized. Our techs cut out the corroded aluminum frames, installed new CGI Sentinel Series vinyl impact sliders with stainless rollers, and added marine-grade weep covers. Now the panels glide with one hand, and the weep holes stay clear through the marine layer season. That’s the kind of local knowledge that changes the estimate you get. A window that leaks air is just a very expensive wall decoration.
CGI Models & Products We Service in San Diego
We service the full CGI product range: the Estate Collection aluminum impact windows, Sentinel Series vinyl impact windows, Classic Line non-impact aluminum windows, and the CGI French and hinged door systems. For structural and impact-rated components, we use OEM CGI hardware. When those parts are back-ordered or discontinued, we substitute high-grade marine stainless rollers, balances, and weatherstripping. We keep a rolling stock of the common CGI wear parts in our San Diego shop so we’re not waiting on a distributor in hurricane country. San Diego service area coverage includes all the neighborhoods we’re describing here.
CGI Service Pricing in San Diego
Here’s what you can expect to pay for common CGI repairs in San Diego:
- Roller assembly replacement on a 3-panel slider: $180 – $320 per panel, including cleaning out the track and adjusting the alignment.
- Glazing bead replacement on a Sentinel window: $95 – $160 per window, depending on size and how many beads are cracked.
- Weep hole clearing and cover installation: $75 – $140 per window, including the marine-grade covers.
- Galvanic corrosion treatment at frame corners: $140 – $280 per corner, depending on how far the corrosion has spread.
- Full frame replacement to vinyl impact (Sentinel Series): $1,400 – $2,800 per opening, depending on size and whether impact-rated glass is required.
Every estimate is written and given to you before any work starts. We don’t change the number once we’re on site unless you add something to the job. Call (619) 793-3248 and we’ll come out, look at your CGI windows, and hand you a line-item price you can keep.
Serving San Diego, CA - Our Local Coverage Area
We’re based in the San Diego area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – CGI Windows & Doors in San Diego
Yes. That white powder is aluminum oxide from galvanic corrosion, and it’s common within a few miles of the San Diego coastline. We disassemble the corner, clean the corrosion, isolate the stainless hardware from the aluminum, and re-assemble. If the corrosion has gone deep enough to compromise the frame, we’ll tell you honestly and recommend replacement. Call (619) 793-3248 for an exact assessment.
The UV exposure on west-facing windows in San Diego is intense enough to embrittle factory glazing beads within five to seven years. The vinyl loses its plasticizers and the beads crack when the window flexes or during re-glazing. We replace them with UV-stabilized aftermarket beads that hold up longer under direct San Diego afternoon sun.
Generally no. Impact resistance requires the frame, glazing, and hardware to be engineered as a system. The Classic Line aluminum frame isn’t built for the thickness and weight of impact glass. In most San Diego homes, our Window Replacement in San Diego with a Sentinel Series vinyl impact unit is the cleaner path, and we’ll show you the price difference before you commit.
We pull the sash, remove the old rollers, clean out the salt and sand grit from the track channel, and install marine-grade stainless rollers. Then we re-align the sash and test it. On Clairemont homes with the original 1960s sliders, this works when the frame itself is still sound. If the aluminum is pitted through, we’ll recommend replacement rather than spending money on a repair that won’t last. Call (619) 793-3248 and we’ll give you a straight answer.
It depends on how long the water has been sitting. If the weep system is clogged but the frame isn’t corroded, we clean the weep holes, install marine-grade weep covers, and the repair typically runs $75 – $140 per window. If water has been pooling inside the frame channels for a long period and the aluminum is corroded or the sash is bowed, replacement is the honest recommendation. We’ll show you the condition of the frame when we’re there so you can see it yourself.
Service Areas Near San Diego
We service the full San Diego area including Clairemont, Mira Mesa, Point Loma, and the Gaslamp Quarter. We also cover the surrounding communities: CGI service in Chula Vista, CGI service in La Mesa, Imperial Beach, Alpine, and La Presa. If you’re within San Diego County, call us and we’ll tell you when we can be out.
Book Your CGI Service in San Diego Today
You know exactly who’s coming to your door because we send you the technician’s name and photo before the visit. Call (619) 793-3248 for your free estimate on any CGI window or door in San Diego. We’ll put the price in writing before anyone picks up a tool.
Written by Spencer Odell, owner at Hale Windows San Diego, serving San Diego since 2009.
Six Reasons Homeowners Choose Hale Windows San Diego
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.