New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows San Diego pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Impact Garage Doors: The San Diego Owner’s Guide
We stock and install CGI-compatible impact garage doors throughout San Diego, with most complete door replacements running between $3,800 and $8,500 installed depending on size, track hardware, and opener integration. You’ll usually know a part has failed before you see it: the door feels heavier, a section sags, a roller chatters in the track, or the bottom panel starts snagging on the way down. Most San Diego owners first notice it on a windy afternoon, when the door rattles harder than it used to against the frame. If your CGI door is ten-plus years old and living within salt-air reach of the coast, the hardware is doing more work than it was designed for.
Which CGI Models This Applies To
CGI’s residential impact garage door lineup breaks into two main families: the Sentinel series (flush-panel, wind-load rated for most coastal and inland San Diego zones) and the Trinity series (raised-panel profile, heavier gauge, often specified for homes east of the 5 where Santa Ana winds punish roll-up doors). The compatibility gotcha most owners run into: CGI uses a proprietary track-and-roller spacing on doors built after 2015, so a generic off-the-shelf roller from a big-box store will bind within a month. You’ll find the model and wind-load rating on a silver sticker inside the left door jamb, about chest height. That sticker matters more than the brand name on the outside. For OEM parts, we match that label against CGI’s current spec sheets. For quality aftermarket equivalents, we only use hardware that matches the original roller diameter, axle length, and bearing type to within manufacturer tolerance. We also stock compatible parts for PGT, CWS, and ES Windows impact doors.
Signs Your CGI Impact Garage Doors Is Failing
- The door shudders halfway up and then smooths out. This is almost always a roller losing its bearing, which lets the door drift sideways and load the track unevenly. Left alone, it scores the track and turns a $40 part into a $400 track replacement.
- You can see daylight at the bottom corners when the door is closed. The bottom seal has flattened or torn, and on a CGI hurricane-rated door, the seal is also part of the wind-load system. A compressed seal lets wind-driven rain walk straight into your garage.
- The door drops faster than it used to when you pull the release handle. That’s the torsion spring losing tension or beginning to crack. On a heavy impact-rated door, this is the one symptom we tell every homeowner not to touch themselves.
- The opener motor runs but the door doesn’t move for a second or two. The coupler or gear inside the opener is wearing, and the delay is the motor spinning against a stripped interface. Eventually the delay becomes a full stop.
- The door is louder on one side than the other. Usually a bent track section or a hinge pin that’s wallowed out its hole. Your ear is more accurate than your eyes for this one.
Replacement Cost & What’s Included
In San Diego, expect a complete CGI impact garage door replacement to land between $3,800 and $8,500, with the spread driven by door width, whether you have windows in the panels, and whether your existing opener needs a new carriage to match the door’s weight. A panel-only replacement on a newer CGI door runs $700 to $1,400 for the panel plus labor. Spring replacement on an impact-rated CGI door runs $280 to $450 per spring, and most of these doors run a pair. Every quote from us is a written, line-item price delivered before any work starts, so there’s no mystery at the end of the job. The 365-Day Done Right Promise applies to the install: if the door isn’t right, we make it right, no argument needed. Parts we install carry a written guarantee; if a repair fails, the second visit is free.
| Work | Typical San Diego Price Range |
|---|---|
| Complete CGI impact door replacement (installed) | $3,800 – $8,500 |
| Single panel replacement | $700 – $1,400 |
| Torsion spring replacement (each) | $280 – $450 |
| Track and roller replacement | $350 – $800 |
| Weather seal and threshold rebuild | $180 – $400 |
DIY or Call Us?
Here’s the honest split. You can safely check the alignment yourself: look at the gap between the door and the track on both sides, and run your hand along the rollers to feel for flat spots. You can also replace the bottom weather seal on most CGI doors with the right profile from us, it’s a thirty-minute job that doesn’t touch anything dangerous. What you should not touch is the torsion spring assembly. Those springs hold the entire weight of a 200-to-300-pound impact door, and when one lets go, it releases that energy in a single violent snap. We’ve seen the aftermath; it’s not worth the hospital bill or the crushed fingers. Same goes for any cable under tension. For anything beyond the seal or a visual check, call us at (619) 793-3248 and we’ll send someone who’s done this a thousand times.
FAQs
A properly maintained CGI impact door lasts 15 to 20 years in most San Diego neighborhoods, but homes within two miles of the coast often see hardware wear in 10 to 12 years because the marine layer deposits salt on the tracks and rollers every morning. Regular lubrication of the rollers and hinges twice a year extends the life significantly. Call (619) 793-3248 for an exact assessment of your door’s condition.
Small dents can be straightened, but once a CGI panel is cracked or the impact rated core is compromised, it cannot be safely repaired and needs replacement. A damaged panel weakens the entire door’s wind load rating, which defeats the reason you bought a CGI door in the first place. We’ll tell you honestly which situation you’re in. Call (619) 793-3248 for a free estimate.
A full CGI impact garage door replacement typically takes four to six hours on site, including removing the old door, hanging the new panels, rebalancing the springs, and testing the full cycle several times. We bring everything we need on the truck, so there’s no running back to a supplier mid-job. Call (619) 793-3248 to schedule your free estimate.
We keep common CGI Sentinal and Trinity rollers, hinges, weather seals, and torsion springs on our trucks, so most repair jobs are completed same-visit. For panel replacements or non-standard width doors, we order from CGI’s California distributor and typically have the part in three to five business days. Call (619) 793-3248 and we’ll tell you over the phone whether we have the part in hand before anyone comes out.
If your CGI impact garage door is acting up, call us at (619) 793-3248 and we’ll get you a free estimate with the price in writing before any work begins. We serve homeowners from Clairemont to the Gaslamp Quarter, and our crew knows exactly what marine air and Santa Ana winds do to these doors over time.
Written by Spencer Odell, Owner, Hale Windows San Diego at Hale Windows San Diego, serving San Diego and nearby areas.
Six Reasons Homeowners Choose Hale Windows San Diego
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.