New windows and doors improve comfort, cut energy bills and add long-term value to your home. Hale Windows San Diego pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Front Door Replacement in San Diego: What to Know First
Mr-Glass front door replacement in San Diego typically runs $2,400 to $6,800 depending on whether you’re replacing the slab alone or the full frame assembly, and most jobs wrap up in one day of on-site work plus a short lead time for the door to arrive. We’re an independent Mr-Glass service provider, not a factory branch, so we match what’s actually in your opening rather than steering you toward whatever’s on a truck. If you’ve got a Mr-Glass front door that’s warped, fogged, sticking, or leaking air, call (619) 793-3248 for a written estimate before anyone picks up a tool.
This page is for San Diego homeowners who own a Mr-Glass entry door and need straight answers about replacement: what fails, what it costs, and who’s actually showing up at your house.
How Mr-Glass Products Fail – and How We Fix Them
- Sidelite seal separation on Mr-Glass Vista Series doors. The Vista Series uses a narrow-stile frame with a thinner seal channel than most competitors. After five to seven years of San Diego sun exposure, the glazing gasket hardens and pulls away from the aluminum, letting salt air from the coast creep into the insulated glass unit. We pull the glass, replace the gasket with a commercial-grade EPDM equivalent, and reseal the unit rather than replacing the whole door.
- Fogged glass in Mr-Glass insulated units with no visible frame damage. This is the one owners call about most. The desiccant-loaded spacer inside the IGU eventually saturates, and once that happens, moisture shows up between the panes and will not go away. On Mr-Glass doors, the glass is replaceable independent of the slab, so we order a matching IGU and swap it without touching your frame or hardware.
- Threshold collapse on ground-floor Mr-Glass units in coastal San Diego neighborhoods. In areas like Ocean Beach, Point Loma, and La Jolla, we regularly see Mr-Glass thresholds that have bowed under years of damp, salty air. The original aluminum threshold was never meant to handle standing moisture. We replace it with a marine-grade threshold and add weep-hole drainage so water moves away from the door instead of under it.
- Sticking or sagging slabs on the Mr-Glass French Door and terrace lines. The hinges Mr-Glass used on some multi-point terrace doors were not heavy-duty enough for the slab weight, and they sag over time. If the hinges are intact, we re-align and reinforce. If the hinge pockets are wallowed out, the slab gets replaced and we upgrade the hinges to a heavier spec than factory.
- Lock strike failure on older Mr-Glass single-door units. We’ve seen enough of these to know the pattern: the strike plate screws were short and the door frame was not fully shimmed, so the lock point drifts and the door stops latching cleanly. On a replacement, we full-shim the new frame, set the strike with long stainless screws into the king stud, and test the latch from both sides before we call it done.
Our Mr-Glass Front Door Replacement Process
- 1
You call (619) 793-3248. A live person picks up. You describe the door, the symptoms, and we schedule a visit. Before the technician arrives, you get their name and photo so you know exactly who’s at the door.
- 2
On-site diagnosis. Spencer or one of his crew measures your existing door, checks the opening for square, looks at the frame condition, threshold, and hardware, and determines whether the slab alone or the full assembly needs to go.
- 3
Written price. Before any work is ordered, you get a line-item written price. If the door is custom-sized, the price includes the custom order. No verbal ballparks, no surprises on the invoice.
- 4
Parts decision. We tell you what’s available OEM, what’s available as a quality aftermarket equivalent, and what the trade-offs are in cost, lead time, and warranty. You choose. We’ll never put a part in your home without naming it first.
- 5
Removal, replacement, sealing, and testing. We pull the old unit, correct any framing issues, install the new door with full shimming and proper flashing, and test the seal with an air-leak check. If the door doesn’t pass, we fix it before we leave.
- 6
Written guarantee. Every Mr-Glass replacement carries a written guarantee. If the repair fails, the second visit is free. And the whole job sits under the 365-Day Done Right Promise: if it’s not right, we make it right.
What Mr-Glass Front Door Replacement Costs in San Diego
| Job | Typical Range |
|---|---|
| Glass-only replacement (fogged IGU, single panel) | $480 – $950 |
| Slab replacement (pre-hung door, standard size) | $2,400 – $4,200 |
| Full frame replacement with one sidelite | $3,800 – $6,100 |
| Custom-sized slab with frame, coastal spec hardware | $5,200 – $6,800+ |
What moves the number: custom sizing, whether you’ve got a sidelite or transom, hardware grade, and whether the rough opening needs framing correction. Coastal San Diego properties often spec marine-grade metal components, which adds cost but keeps salt air from eating the door in three winters. Call (619) 793-3248 for a written line-item quote on your specific door. Estimates are free, and the price you get is the price you pay.
Why San Diego Homeowners Call Hale Windows San Diego for Mr-Glass Work
We carry no single-brand loyalty. We service eight professional door and window lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. That matters when you own a Mr-Glass door because we can tell you honestly whether a replacement Mr-Glass part is your best move or whether a Therma-Tru or PGT component will hold up better in San Diego’s coastal climate. We don’t push one brand; we match the product to the job.
Every technician who walks your front step has been background-checked, identity-verified, photo-badged, and pre-announced by name and photo before the visit. That’s the Threshold Standard, and it’s not optional on any Hale job. Spencer Odell has spent the better part of two decades working on windows and doors across Southern California, and he and his crew have seen pretty much every creative way a coastal home can destroy an entry door. The 365-Day Done Right Promise is stamped on every job. If it’s not right, we make it right. No fine print, no argument.
FAQs
Replacing the door slab or frame through an independent provider like Hale Windows San Diego generally does not void a remaining Mr-Glass warranty, and we’ll help you understand what’s still covered before any work begins. As an independent Mr-Glass service provider, we are not authorized by Mr-Glass, but our written guarantee covers our workmanship and the parts we install. Call (619) 793-3248 and we’ll walk you through what your specific door’s warranty still covers.
Yes, in most cases we can match a replacement Mr-Glass door to your existing sidelites, as long as the frame profile is still available. If the profile has been discontinued, we’ll show you alternative finishes and glass packages that read as a clean match, and we’ll put the options in writing before you commit.
Glass-only replacements usually happen within a week. Full slab or frame replacements typically require one to two weeks for the door to arrive, then a single day of on-site work. Custom sizes and special hardware can stretch the lead time; we’ll give you a straight answer on timing when you call (619) 793-3248.
A slab replacement swaps just the door panel itself and leaves the existing frame in place. A full frame replacement removes the frame and door together, which fixes sagging, rot, air leaks, and threshold problems in one go. If your Mr-Glass frame is still square and dry, slab replaces are the cheaper path. If the frame has moved or rotted, half measures won’t hold. We’ll tell you which one your door actually needs.
Most front door replacements in San Diego do not require a permit when the opening size is unchanged and structural framing is not altered. If your job does require a permit, we handle it and the inspection. No guesswork, no surprise fees. Call (619) 793-3248 and we’ll tell you on the first call whether your job triggers a permit.
Written by Spencer Odell, Owner, Hale Windows San Diego at Hale Windows San Diego, serving San Diego and nearby areas.
Six Reasons Homeowners Choose Hale Windows San Diego
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.